3D Printing: Technology That Can Save The People From Coronavirus

The World and its Economy suffered a major setback when ‘WHO’ as on 11 March 2020 declared Coronavirus as a Global Ongoing Pandemic. Many of us wanted to know the implications of this Pandemic on various industries. But the Logistics Industry was the only one that was plunged into a crisis that was yet to unfold. The Disruption in manufacturing and production, together with the shutdown, constrained supply chains, giving rise to critical shortages of Medical Equipment.

Nurses forced to wear garbage bags amid the shortage of PPE kits
Nurses in US hospital are forced to wear garbage bags as PPE because of shortage of latter. [Image- NYPost]

With the advent of government guidelines amid an ongoing crisis, there was a drastic increase in demand for medical essentials. An industry emerged to counter the Supply-Demand Misbalance along with Local help to achieve Extra-ordinary feats. Additive Manufacturing Industry termed as ‘Industry 4.0’ upgraded its capabilities to join the fight alongside the Healthcare sector against Novel Corona Virus. 

Beginning of The Crisis

After the outbreak, there was a dire need for medical tests that are as much as reliable as rapid. Mainly two tests were approved for the detection of the virus; The Complete Blood test and the other is the Nasopharyngeal Swab test. The latter being rapid as well as simple to use, is deployed throughout the World.

nurses strike over shortage of PPEs
Nurses protests in front of hospital after PPE shortage endangers their safety [Image- Guardian]
shortgaes of medical supply in US hospitals
Masks, ventilator parts, pumps, and many types of equipment that are not available in areas of major outbreak. [Image- Washington Post]

The Nasopharyngeal Swab is like a long pipe cleaner but with a very soft brush on the end. The personnel conducting the test would insert the swab from the base of your nose to touch the back of your throat. The soft bristles will collect a sample of secretion for analysis because the cells and fluids have to be collected from the entire passage for a good sample. Needless to say, the swab is a little bit uncomfortable, but it’s part of a procedure. I mean which medical test is ever comfortable!

after swabs fall short, 3-D printing companies started mass-printing them
3D printed Nasopharyngeal swabs developed by Carbon Company. [Image- Carbon3d]

The problem began when the Nasopharyngeal swab’s demand sky-rocketed overnight. At that instant, there were not 10, nor 7 but only Two major companies that mass-produced them. One of those companies is Puritan Medical Products, based in Guilford, Maine. The overwhelming demand was tackled by ramping up the production to 1 Million swabs a week. Then the too U.S was facing a shortage, let alone the whole world.

Rising From The Ashes

The Lockdown was a big blow to all the existing Industries. After the disruption of airways, railways, and road transport systems, the production sector succumbed to high pressure and vast needs of Medical. The whole scenario was disturbing enough to see. An immediate response was needed from the locals due to the disruption of Logistics. That’s where these ADIs came into the field as a substitute but became much more. Highly encouraged people formed a network within days to save the lives of millions of people rekindling the Torch of Mankind. 

3-D printed carbon face shields that are efficient as traditional ones.
3D printed Carbon face shields that are as efficient as traditional ones. [Image- Carbon3d]

To cope with the challenge of providing the latest technology, and to save the lives of several people, ADI decided to create a highly de-centralized authentic network. Many companies, hobbyists, and enthusiasts formed an open-source platform of 3D printers to cater to their needs. Companies like Carbon™, FormLabs, and Issinova accepted the challenge and started to make various designs for a wide range of products. While many made certain progress in upgrading the technology like the TiO2 nano-fiber mask, 3D printing allows production and good quality within your reach.

3-D printed isolation wards
3D printed isolation wards to combat the overpopulating hospital OPD wards. [Image- Winsun3d]

The companies worked together with doctors, engineers, designers to work out the best designs suitable for different types of equipment. The main objective was to develop such products that would match all the required criteria and guidelines set by ‘WHO’.

Tapping The Hidden Potential of 3D Printing

The digitalization especially the cloud facility helped the De-Centralized network to become more robust. Not only local volunteers with 3D printers but engineers and workers all over the world offered their help. The key goal was to make an ergonomic design with the help of various software.

So a company called Carbon™ picked the challenge. They made designs, improved them, tested them, and began to mass-produce them all in 20 day time. Their breakthrough technology DLS uses high-quality resin combined with a texture like finish that can outperform any existing products developed via the powder bed technique.

The 3d printing breakthrough carbon machine
The Carbon 3D printing machine. 1) Build platform 2) Liquid Resin 3) Oxygen permeable window 4) Deadzone 5) UV light processor [Image- Carbon3d]
Video of continous liquid interface platform
The heart of process- Deadzone. [Image- Carbon3d]

The DLS employs light projection, oxygen-permeable optics, to produce exceptional parts. The method called CLIP here uses a UV light machine to project cross-sectional parts of the model encoded in UV light at the liquid resin. The resin solidifies when exposed to UV light and oxygen permeates through the filter. The resin on the sides rushes to take the place of solid resin creating a continuous flow of liquid. (Know More about CLIP)

The RP95-M mask
The RP95-M mask developed as a result of collaboration of 30 companies. [Image- Winsun3d]
RP95-M mask
RP95-M mask offers highest FPP3 protection in its class. [Image- Winsun3d]

The 3D printing sector also helped hospitals by printing and assembling whole Isolation wards for patients. Many innovations were also made in the area of resin, mask filters, and other products. Recently CTU made a new mask called “RP95-M” which offers the highest degree of protection in the FPP3 level.

Embracing The Challenges

The critical point for this industry was to make the consumers believe that the products they were using were tested and performed equally, or in some cases better than the traditional ones. Another challenge they faced was to ensure that the STEP/STL files were not tampered with. Copyright Infringement was a serious issue they faced since they had to share or upload files to reach more people.

The Core idea of the setup was to help the most affected areas. The FDA also issued an “International Risk Classification system” that provided regulations and ensured the performance and safety of devices. The new designs are approved after keratin tests and new materials are certified for the benefit of 3D printing.

Future 4.0

In the wake of the Covid-19 Pandemic, ADI played a major role in solving the crisis and sprang to action when the world was in a state of emergency. The inherent flexibility and possibility of the 3D printing industry also provide a base for a cleaner and greener future. Advances in developing new materials can make them bio-degradable and tackle the issue of disposal of medical waste in one shot.

disposal of medical waste is currently a main concern for experts.
Used N95 masks are collected at Massachusetts General Hospital in Boston on April 13, 2020. Hospital staff wrote their names on their old masks so each can be returned to their original user to ensure the best fit. As part of a bold initiative involving hospitals across the state, MGH on Monday began distributing thousands of freshly decontaminated N95 masks to health care workers after the equipment went through an elaborate cleaning process at a site now up and running in Somerville. The treatment takes place inside a giant decontamination machine owned and operated by the Ohio nonprofit Battelle. Hospitals plan to use the machine to alleviate critical shortages of respirator masks for workers battling the coronavirus pandemic. At its peak, the system will be able to treat up to 80,000 masks per day a prospect hailed as a game-changer for the region. (Image- Bostonglobe)

Thanks to its supply-on-demand ability, and digitalization feature it comes very handy whenever needed. Post Pandemic supply chains are expected to be more fragmented, changing the scenario of manufacturing with more investment in the ADI sector. There is no doubt that this industry will be a gold coin for others in the post-pandemic, cyber-physical age.

The Secret of Change is to focus all of your energy, not on fighting the old, but building on the new!

Socrates, Philosopher

Related articles

Meet APC: A Leading-Edge Technology to boost Old Combustion Engines

Combustion Engines are now experiencing a downfall, however, the researchers haven't failed to experiment with improvements.

Space Junk: What is it and Why is it a problem for us

Ever since, the first artificial satellite, Sputnik 1 was launched in 1957, we have launched more than 10,000 satellites, with nearly 6,000 still in orbit out of which about only 3,000 are currently operational. The amount of space junk generated by them is so much that it's now becoming a huge concern to us.

Spicing Up Your Security: Salt and Pepper To Make Your Password Hash More Secure…

We live in a digital era where data is more precious than life. How is this data secured then? Well, it is with salt and pepper, not the spices, but the cryptographic ones. Read more about how these cryptospices improve your data security and protect your hash from hackers and crackers.

The Top 10 Mind-blowing Technologies That Stole The Spotlight In CES 2021

With 2021 kicking off and everyone filled with a...

Iron Air Battery: Meet The Tech of The Past That Can Save The Future

In Feb 2021, the state of Texas suffered the...
Harshil Bhanushali
Harshil Bhanushali
Pursuing Masters in Chemistry. I'm a Student of Curiosity exploring Wonders ranging from quantum to space. I'm also a tech enthusiastic and an amateur web designer.

3 COMMENTS

  1. Asking questions are genuinely nice thing if you
    are not understanding anything fully, however this piece of
    writing gives nice understanding even.

  2. whoah this weblog is wonderful i really like reading your articles.
    Keep up the good work! You recognize, a lot of people are
    searching round for this info, you can aid them greatly.

    Here is my blog Madonna

LEAVE A REPLY

Please enter your comment!
Please enter your name here
Captcha verification failed!
CAPTCHA user score failed. Please contact us!